LINYI SHENGDE PLASTIC CO., LTD.

Chinese largest high quality PE tarpaulin manufacturer!

Home > Exhibition > Content
How to use tarpaulin good?
- Oct 28, 2016 -

A, tarpaulin positive (waist rope out) vertical cover thatch, waist rope in the platform side.

B, angle rope tied: the tarp each end of the two angle rope tension, respectively, so that the tarpaulin angle to the lateral expansion into a triangular shape. Cloth angle on both sides flattened after the folding end wall of the truck, tightly wrapped at both ends of the vehicle, through the pressure rope, handgrip or hand brake lever inside, was X-type tension, respectively, tied to the vehicle at both ends of the T-iron.

C, the binding of the pressure rope: tarp each end of the pressure rope, should be pressed tarpaulin wrap angle tightened, so that tarp close to the vehicle end wall, respectively, tied to the side of the vehicle on the T-iron.

D, the end of the rope tied: tarp each end of the two end of the rope, should be tightened shut, through the hand hook or hand brake lever, respectively, tied vertically at the end of the vehicle two T-iron.

E, waist, side of the rope binding: vehicles in the middle of the T-shaped iron, tarpaulin middle of the waist, the side of the rope were tied in the middle of the vehicle on the T-iron; vehicles without T-iron, tarp the middle of the waist, Bundled near the middle of the vehicle on the T-iron. Other waist, side rope, starting from both ends of the vehicle, toward the middle of the vehicle, the order tied to the corresponding T-shaped iron.